K-line - Bench-/Stand scales - METTLER TOLEDO

Bench-, stand scales

The assortment of bench- and stand scales of the K-line includes weighing ranges from 3 to 600 kg with a verificable resolution of 15 000 e / 32 000 e. The weighing platform sizes vary from 280x350 mm to 600x800 mm. The hybrid construction - electromagnetic force compensation cell and lever arm system - guarantee optimum linearity with slightest corner load tolerances. The individual models are available as stainless steel- respectively as painted version and can be used in wet or dry areas. All models can be used in hazardous areas of zone 2 / 22.

Request more Information

Get a Quote

Electromagnetic force compensation
This technology provides best repeatability with highest resolution.
Plug'n weigh
The integrated A/D-converter of the measuring cell sends a digital
measuring signal.Therefore, all ID-operating terminals can be connected
easily and without any problems in verificable mode.
Software adaptations
The individual possibilities to adjust weighing process-, vibration- and
standstill adapter adapt the weighing system to the environmental
conditions at the place of use.
Update rate of 20 ups
Highest efficiency for dispensing and filling
Internal test- / adjusting weight
During installation, the existing gravitations at different places on earth are considered.
IP-protection
The measuring cell has an IP66/67-protection and is safeguarded against
penetration of water and dust.
Type of protection
The measuring cell offers the following type of protection:
II 3 G EEx nA IIC T6, II 3 D IP67 T70° C.

Search your Product by Features

Balances and Scales Product Finder

Bench, Floor, Pit, Pallet Scales Product Finder

Products

	Maximum Capacity	Readability
KA15s	15.0 kg	0.1 g
KA32s	32.0 kg	0.1 g
KA3s	3.0 kg	0.01 g
KA6s	6.0 kg	0.02 g
KB60 s	60 kg	1 g
KCC150s	150 kg	1 g
KCC300s	60 kg / 150 kg / 300 kg	2 g